Nylon hammer drive fixings consists of a nylon expanding plug and a screw pre-assembled. A steel screw passes through a concentric channel and extends downward from an opening in the head of a nylon plug to the handle until it is just below the opening below the head.The top of the screw has a groove and external threads on the bottom help to lock the anchor in place during installation.

   As a kind of nylon expansion anchors, Nylon hammer fixings belongs to light-medium duty anchor, used for solid base materials such as concrete, brickwall or block. As the screw passes through nylon body, the open end is extended to grasp the hole wall to generate expansion force. also used as toggle fixing bolt or blind rivets in wall boards or gypsum to connect several thicknesses of material together, especially in applications subject to vibration.

  For installing, to insert nylon plug into the pre-drilled hole and tap or tighten the screw with hammer or screwdriver until it contacts the head of the nylon plug body. Nylon plug is made of high-quality nylon-PA material, with corrosion resistance, UV resistance, excellent strength and flexibility, and can withstand temperatures from -40° to 170°, widely used in plastic expansion anchor systems.

Features:

☛ Quick and easy to install & Nylon plug has anti corrosion and rust-proof.

☛ Being suitable for light-medium duty loading purpose.

☛ To hit or tighten screw with hammer or screwdriver when installing.

☛ Retaining power can be removed easily to loosen screw.

Materials & Color: 

● Nylon-PA or PE & Various color are available.

Base Materials: 

 ☑ Concrete ☑ Masonry ☑ Brickwork ☑ Brick wall ☑ Solid wall 

Applications:

♔ Railing,special door industry,wall panel.

♔ Installation of interval signs, handrails, railings, shelves and gates.

♔ Cable and electrical equipment.

♔ Installation of banister starter bars for structural expansion and rectification works.

♔ Structural expansion and rectification works.

♔ bathroom, kitchen and interior decoration installation.

Installation Steps:

① Drill a hole in the base material to ensure the correct diameter and applicable depth.

② Use a nylon brush or high pressure air pump to remove all debris and dust.

③ Insert nylon plug into a guide hole in the fixture and vertically pass it through a substrate hole.

④ Tap nylon plug head till being flush with the surface of the fixture.

⑤ Put screw into plug and hit or tighten screw by tool until be fixed fully.

Product size description: (mm)

** The special sizes are available.

** Mushroom head, Cylinder head and Countersunk head styles are available.