Self drilling wall plugs are made from high grade reinforced polyamide(Nylon) having toughness and impact resistance,widely used in plasterboard, fiberboard or other wooden and soft panels. Used with the self drilling screws,hooks and eyebolt screws in the light duty application loads. The designed heavy helical thread biting into the plasterboard substrate for a secure fixing with high load-bearing capacity.
The head design of cross-drive recess is easy to drive it into the base by a standard screwdriver or bit. The sharp end design is directly penetrated into the plasterboard without pre-drilling hole. Some only need to drill a shallow hole meeting thick or hard panels.Thin and firm flange head lip make the head close to the board surface. Short fixing length means that only a small amount of space is required behind the board. Plasterboard wall plugs are used in the case of unknown board thickness and cavity depth as well.
★ Being suitable for light duty loading.
★ Do not need to pre-drill hole in plasterboard base material.
★ Having fixing function, No expanding function for this W end type.
★ Hollow structure make self drilling screw drive into easily for installation.
★ Made of reinforced PA-Nylon having corrosion resistance,rust proof,UV-proof, moisture-proof, environmental protection,no-conductivity.
★ Easy to replace or dismantle to loose a self drilling screw and speed plug.
★ Quick and easy to install and use.
★ Various end types are available.
Materials & Surface treatment:
● Reinforced PA-Nylon & In white, grey or other color.
Base Materials: ☑ Plasterboard ☑ Wooden and soft material panels.
♔ Fixing bathroom, kitchen accessories, mirrors and photo frames.
♔ Installation and fixing of bookshelves, background picture and living objects.
♔ Fix light pipe fastening and electrical installation.
♔ Install curtain bars or signage indoor site.
♔ Cable wire system installation and fixing projects.
♔ Installing fixtures and objects for interior and room decoration engineering.
① Drive plasterboard wall plug into the base material by screwdriver, till the head is close to the base surface.
② Pass a self drilling screw through a guide hole in the fixture, vertically align with and insert it into the center hole in the plug.
③ Tighten self drilling screw by screwdriver till be fixed fully.
Product size description: (mm)
| Item Code|| Anchor Size||Outer thread ||Total Length||Head Dia.|
|KNEZ1342||13 X 42||13||42||13|
** The special sizes and various end types are available.